Toyota 3VZ–FE Troubleshooting Manual page 32

EG–32
ENGINE TROUBLESHOOTING
13. REMOVE RH ENGINE MOUNTING STAY AND NO.2 RH
14. REMOVE PS OIL RESERVOIR TANK WITHOUT
15. REMOVE SPARK PLUGS
16. REMOVE NO.2 TIMING BELT COVER
17. REMOVE ENGINE RH MOUNTING BRACKET
18. IF RE–USING TIMING BELT, CHECK INSTALLATION
– ENGINE MECHANICAL
ENGINE MOUNTING BRACKET
Remove the bolt, nut, mounting stay and mounting bracket.
DISCONNECTING HOSES
Remove the eight bolts, timing belt cover and gasket.
Remove the three bolts and mounting bracket.
MARKS ON TIMING BELT
Check that there are four installation marks on the timing belt
by turning the crankshaft pulley as shown in the illustration.
If the installation marks have disappeared, place a new
installation mark on the timing belt before removing each
part.