ENGINE TROUBLESHOOTING
13. DISCONNECT ENGINE COOLANT RESERVOIR HOSE
Remove the bolt and disconnect the reservoir hose.
14. REMOVE WASHER TANK
(a) Remove the three washer tank mounting bolts.
(b) Disconnect the connector and hose, and remove the washer
tank.
15. REMOVE ENGINE COOLANT RESERVOIR TANK
Using a screwdriver, remove the reservoir tank.
16. DISCONNECT WIRES AND CONNECTORS
(a) Remove the engine relay box, and disconnect the three
connectors.
(b) Two connectors from LH fender apron
(c) Igniter connector
(d) Ignition coil connector
(e) High–tension cord from ignition coil
(f)
Noise filter connector
(g) Connector from fender apron
–
ENGINE MECHANICAL
EG–91