Remove A/C Compressor Bracket; Remove No.1 Idler Pulley; Remove Crankshaft Timing Pulley; Remove Oil Pump - Toyota 3VZ–FE Troubleshooting Manual

ENGINE TROUBLESHOOTING

16. REMOVE A/C COMPRESSOR BRACKET

Remove the three bolts and A/C compressor bracket.
17. SUSPEND ENGINE WITH ENGINE SLING DEVICE
18. REMOVE TIMING BELT (See page EG–29)

19. REMOVE NO.1 IDLER PULLEY

Using a 10 mm hexagon wrench, remove the bolt, idler pulley
and plate washer.

20. REMOVE CRANKSHAFT TIMING PULLEY

If the pulley cannot be removed by hand, use two screwdriv-
ers.
HINT: Position shop rags as shown to prevent damage.

21. REMOVE OIL PUMP

(a) Remove the nine bolts.
(b) Remove the oil pump by prying a screwdriver between the oil
pump and main bearing cap.
(c) Remove the O–ring.
– LUBRICATION SYSTEM
EG–297