Toyota 3VZ–FE Troubleshooting Manual page 87

ENGINE TROUBLESHOOTING
39. (A/T)
CONNECT THROTTLE CABLE, AND ADJUST IT
40. INSTALL ACCELERATOR CABLE, AND ADJUST IT
41. FILL WITH ENGINE COOLANT
42. CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
43. START ENGINE AND CHECK FOR LEAKS
44. ADJUST IGNITION TIMING (See IG section)
Ignition timing:
45. PERFORM ROAD TEST
Check for abnormal noise, shock, slippage, correct shift
points and smooth operation.
46. RECHECK ENGINE COOLANT LEVEL AND OIL LEVEL
– ENGINE MECHANICAL
10 BTDC @ idle
(w/ Terminals TE1 and E1 connected)
EG–87