CHARGING SYSTEM
–
GENERATOR
3.
INSTALL NO.2 AND NO.3 RH ENGINE MOUNTING STAYS
(a) Install the No.2 RH engine mounting stay with the bolt and
nut.
Bolt
Torque: 75 N m (760 kgf cm, 55 ft lbf)
Nut
Torque: 62 N m (630 kgf cm, 46 ft lbf)
(b) Install the No.3 RH engine mounting stay with the two bolts.
Torque: 73 N m (740 kgf cm, 54 ft lbf)
4.
CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
5.
PERFORM ON–VEHICLE INSPECTION
(See page CH–5)
CH–21