Install Air Pipe; Install Lh Delivery Pipe And Injectors - Toyota 3VZ–FE Troubleshooting Manual

EG–82
ENGINE TROUBLESHOOTING
(e) Install the three bolts.

18. INSTALL AIR PIPE

(a) Install the air pipe with the two bolts.

19. INSTALL LH DELIVERY PIPE AND INJECTORS

(a) Place the two spacers in position on the intake manifold.
(b) Place the three injectors together with the LH delivery pipe in
(c) Check that the injectors rotate smoothly.
(d) Position injector connector upward.
(e) Install the two bolts.
(f)
– ENGINE MECHANICAL
Torque: 13 N m (130 kgf cm, 9 ft lbf)
Torque: 8.3 N m (85 kgf cm, 73 in. lbf)
NOTICE: Clean the injector holes before installing the in-
jectors into the intake manifold.
position on the intake manifold.
HINT: If injectors do not rotate smoothly, the probable cause
is incorrect installation of O–rings. Replace the O–rings.
Torque: 13 N m (130 kgf cm, 9 ft lbf)
Connect the fuel return hose to the No.1 fuel pipe (fuel inlet
hose).