ENGINE TROUBLESHOOTING
(c) Apply clean engine oil to the gasket of a new oil filter.
(d) Lightly screw the oil filter into place, and tighten it until the
gasket contacts the seat.
(e) Using SST, tighten it an additional 3/4 turn.
SST 09228–07500
3.
FILL WITH ENGINE OIL
(a) Clean the install the oil drain plug with a new gasket.
Torque: 37 N m (375 kgf cm, 27 ft lbf)
(b) Fill with new engine oil (API grade SG Energy–conserving II
multigrade and recommended viscosity oil).
Capacity:
Drain and refill
w/ Oil filter change
w/o Oil filter change
Dry fill
(c) Reinstall the oil filler cap.
4.
START ENGINE AND CHECK FOR LEAKS
5.
RECHECK ENGINE OIL LEVEL (See page EG–290)
–
LUBRICATION SYSTEM
4.3 liters (4.5 US qts, 3.8 lmp.qts)
4.1 liters (4.3 US qts, 3.6 lmp. qts)
5.0 liters (5.3 US qts, 4.4 lmp. qts)
EG–293