Generator Disassembly; Remove Rear End Cover; Remove Brush Holder And Ic Regulator; Remove Rectifier Holder - Toyota 3VZ–FE Troubleshooting Manual

CHARGING SYSTEM – GENERATOR

GENERATOR DISASSEMBLY

1.

REMOVE REAR END COVER

(a) Remove the nut and terminal insulator.
(b) Remove the three nuts and end cover.
2.

REMOVE BRUSH HOLDER AND IC REGULATOR

(a) Remove the brush holder cover from the brush holder.
(b) Remove the five screws, brush holder and IC regulator.
3.

REMOVE RECTIFIER HOLDER

(a) Remove the four screws and rectifier holder.
CH–11
CH013–01