Toyota 3VZ–FE Troubleshooting Manual page 265

EG–262
ENGINE TROUBLESHOOTING
3.
4.
5.
6.
7.
8.
9.
10. INSTALL CRUISE CONTROL ACTUATOR COVER
11. FILL WITH ENGINE COOLANT (See page EG–244)
12. FILL COOLING FAN (PS) RESERVOIR TANK WITH FLUID
13. CONNECT CABLE TO NEGATIVE TERMINAL OF
14. START ENGINE AND CHECK FOR LEAKS
15. BLEED ELECTRONICALLY CONTROLLED HYDRAULIC
16. (A/T)
– COOLING SYSTEM
(A/T)
CONNECT OIL COOLER HOSES
CONNECT RADIATOR LOWER HOSE
INSTALL ENGINE UNDER COVER
CONNECT HYDRAULIC MOTOR RETURN HOSE
CONNECT ENGINE COOLANT RESERVOIR HOSE
CONNECT RADIATOR UPPER HOSE
CONNECT PRESSURE HOSE TO HYDRAULIC MOTOR
Connect the pressure hose with a new gasket and the union
bolt.
Torque: 64 N m (650 kgf cm, 47 ft lbf)
BATTERY
COOLING FAN SYSTEM
(See page EG–265)
CHECK AUTOMATIC TRANSMISSION (A/T) FLUID LEVEL
NOTICE: Do not overfill.