Table of Contents
Advertisement
ST–18
STARTING SYSTEM
–
STARTER
STARTER INSTALLATION
(See page ST–5)
1.
INSTALL STARTER
(a) Install the starter with the two bolts.
Torque: 39 N m (400 kgf cm, 29 ft lbf)
(b) Connect the starter wire with the nut.
(c) Connect the starter connector.
2.
INSTALL CRUISE CONTROL ACTUATOR
(a) Install the cruise control actuator with the three bolts.
(b) Connect the actuator connector.
(c) Install the actuator cover.
3.
INSTALL BATTERY
4.
CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
5.
CHECK THAT ENGINE STARTS
ST01M–02
- Quick Links:
- Engine Mechanical
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
