Table of Contents
Advertisement
IGNITION SYSTEM
–
PRECAUTIONS
PRECAUTIONS
1.
Do not leave the ignition switch on for more than 10
minutes if the engine does not start.
2.
With a tachometer connected to the system. Connect the
test probe of the tachometer to terminal IG
DLC1.
3.
As some tachometers are not compatible with this
ignition system, we recommend that you confirm the
compatibility of your before use.
4.
NEVER allow the tachometer terminals to touch ground
as it could result in damage to the igniter and/or ignition
coil.
5.
Do not disconnect the battery while the engine is
running.
6.
Check that the igniter is properly grounded to the body.
IG–3
IG019–01
of the
- Quick Links:
- Engine Mechanical
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
