Connect Rr Engine Mounting Insulator; Connect Lh Engine Mounting Insulator; Install Ps Pump; Connect Hydraulic Cooling Fan Pressure Hose - Toyota 3VZ–FE Troubleshooting Manual

ENGINE TROUBLESHOOTING
9.

CONNECT RR ENGINE MOUNTING INSULATOR

(a) Connect the mounting insulator with the four nuts.
Torque: 66 N m (670 kgf cm, 48 ft lbf)
(b) Install the hole plugs.

10. CONNECT LH ENGINE MOUNTING INSULATOR

(M/T)
Connect the mounting insulator with the three bolts.
Torque: 64 N m (650 kgf cm, 47 ft lbf)
(A/T)
Connect the mounting insulator with the four bolts.
Torque: 64 N m (650 kgf cm, 47 ft lbf)
11. REMOVE ENGINE SLING DEVICE

12. INSTALL PS PUMP

(a) Install the PS pump with the two bolts.
Torque: 43 N m (440 kgf cm, 31 ft lbf)
(b) Install the drive belt.
13. INSTALL DRIVE SHAFTS (See SA section)
14. CONNECT HYDRAULIC COOLING FAN PRESSURE
HOSE
Using SST, connect the pressure hose.
SST 09631–22020
– ENGINE MECHANICAL
EG–131