Fuel Pump Installation; Install Fuel Pump Bracket Assembly To Fuel Tank; Install Floor Service Hole Cover - Toyota 3VZ–FE Troubleshooting Manual

EG–178
ENGINE TROUBLESHOOTING

FUEL PUMP INSTALLATION

(See page EG–174)
1.
(a) Install a new gasket to the pump bracket.
(b) Insert the pump bracket assembly into the fuel tank.
(c) Install the pump bracket with the eight screws.
2.
(a) Using SST, connect the outlet pipe to the pump bracket.
(b) Connect the return hoses to the pump bracket.
3.
4.
5.
(a) Install the service hole cover with the three screws.
(b) Connect the fuel pump (with fuel sender gauge) connector.
6.
7.
– SFI SYSTEM
INSTALL FUEL PUMP BRACKET ASSEMBLY TO FUEL
TANK
Torque: 3.9 N m (40 kgf cm, 35 in. lbf)
CONNECT FUEL PIPE AND HOSE TO FUEL PUMP
BRACKET
SST 09631–22020
Torque: 30 N m (310 kgf cm, 22 ft lbf)
CHECK FOR FUEL LEAKAGE (See page EG–160)
CONNECT FUEL PUMP LEAD WIRE

INSTALL FLOOR SERVICE HOLE COVER

INSTALL REAR SEAT CUSHION
CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
EG0GK–01