Toyota 3VZ–FE Troubleshooting Manual page 41

ENGINE TROUBLESHOOTING
(b) (RH Camshaft Pulley Position)
Turn the camshaft, align the knock pin hole of the camshaft
with the timing mark of the No.3 timing belt cover.
(c) (LH Camshaft Pulley Position)
Turn the camshaft timing pulley, align the timing marks of the
camshaft timing pulley and No.3 timing belt cover.
10. INSTALL TIMING BELT TO LH CAMSHAFT TIMING
PULLEY
(a) Check that the installation mark on the timing belt matches
the end of the No.1 timing belt cover.
If the installation marks do not align, shift the meshing of the
timing belt and crankshaft timing pulley until they align.
(b) Remove any oil or water on the LH camshaft timing pulley,
and keep it clean.
(c) Using SST, slightly turn the LH camshaft timing pulley
clockwise. Align the installation mark on the timing belt with
the timing mark of the camshaft timing pulley, and hang the
timing belt on the LH camshaft timing pulley.
SST 09278–54012
(d) Using SST, align the timing marks of the LH camshaft pulley
and No.3 timing belt cover.
SST 09278–54012
(e) Check that the timing belt has tension between the
crankshaft timing and LH camshaft timing pulleys.
– ENGINE MECHANICAL
EG–41