Toyota 3VZ–FE Troubleshooting Manual page 94

EG–94
ENGINE TROUBLESHOOTING
(f)
25. REMOVE
(a) Disconnect the A/C compressor connector.
(b) Remove the drive belt.
(c) Remove the five bolts, compressor stay and disconnect the
26. REMOVE FRONT EXHAUST PIPE
(a) Loosen the two bolts, and disconnect the bracket.
(b) Remove the two bolts and nuts holding the front exhaust pipe
(c) Remove the four nuts holding the exhaust pipe to the exhaust
(d) Disconnect the front exhaust pipe and gaskets.
27. REMOVE DRIVE SHAFTS
– ENGINE MECHANICAL
Remove the two nuts, and pull out the engine wire from the
cowl panel.
A/C
DISCONNECTING HOSES
A/C compressor.
HINT: Put aside the compressor, and suspend it to the radia-
tor support with a string.
to the three–way catalytic converter.
manifolds.
(See SA section)
COMPRESSOR WITHOUT