Toyota 3VZ–FE Troubleshooting Manual page 114

EG–114
ENGINE TROUBLESHOOTING
C.
(a) Using SST and a press, press out the bushing.
(b) Align the oil holes of a new bushing and the connecting rod.
(c) Using SST and a press, press in the bushing.
(d) Using a pin hone grinder, hone the bushing to obtain the
(e) Check the piston pin fit at normal room temperature. Coat the
– ENGINE MECHANICAL
If necessary, replace connecting rod bushing
SST 09222–30010
SST 09222–30010
standard specified clearance (see step B above) between
the bushing and piston pin.
piston pin with engine oil, and push it into the connecting rod
with your thumb.