Install Engine Rh Mounting Bracket; Install No.2 Timing Belt Cover - Toyota 3VZ–FE Troubleshooting Manual

EG–44
ENGINE TROUBLESHOOTING
(b) CHeck that each pulley aligns with the timing marks as shown

15. INSTALL ENGINE RH MOUNTING BRACKET

16. INSTALL NO.2 TIMING BELT COVER

(a) Install the gasket to the timing belt cover.
(b) Install the timing belt cover with the eight bolts.
17. INSTALL SPARK PLUGS
18. INSTALL PS OIL RESERVOIR TANK
19. INSTALL NO.2 RH ENGINE MOUNTING BRACKET AND
(a) Temporarily install the No.2 RH engine mounting bracket and
– ENGINE MECHANICAL
in the illustration.
If the marks do not align, remove the timing belt and reinstall
it.
Install the mounting bracket with the three bolt.
Torque: 39 N m (410 kgf cm, 30 ft lbf)
HINT: Use the bolts indicated by A, B and C.
Torque: 18 N m (180 kgf cm, 13 ft lbf)
ENGINE MOVING CONTROL ROD
engine moving control rod with the three bolts in the
sequence shown.