Distributor Assembly; Remove Rotor; Install Distributor Cap; Install Wire Harness Clamp Clip - Toyota 3VZ–FE Troubleshooting Manual

IG–16
IGNITION SYSTEM – DISTRIBUTOR
3.

REMOVE ROTOR

Remove the two screws and rotor.

DISTRIBUTOR ASSEMBLY

(See page IG–15)
1. INSTALL ROTOR
(a) Align the hollow of the signal rotor with the protrusion of the
rotor.
(b) Install the rotor with the two screws.
2.

INSTALL DISTRIBUTOR CAP

Install the distributor cap with the three screws.
3.

INSTALL WIRE HARNESS CLAMP CLIP

Install the clip with the screw.
IG01M–02