Relay Cable; Control Panel Cable; Drive Composer Pc Tool Cable; Fpba-01 Profibus Dp Adapter Module Connectors - ABB ACS580-01 Hardware Manual



Relay cable

The cable type with braided metallic screen (for example ÖLFLEX by LAPPKABEL,
Germany) has been tested and approved by the manufacturer.


Control panel cable

In remote use, the cable connecting the control panel to the drive must not exceed
100 m (330 ft). If multiple drives are connected, the total length of the panel bus must
not exceed 100 m (330 ft).
The cable type tested and approved by the manufacturer is used in control panel
option kits. Suitable cables are CAT 5e unshielded or shielded twisted pair cables.


Drive composer PC tool cable

Connect the Drive composer PC tool to the drive through the USB port of the control
panel. Use a USB type A (PC) - type B (control panel) cable. The maximum length of
the cable is 3 m (9.8 ft).


FPBA-01 PROFIBUS DP adapter module connectors

Frames R0...R3: The following connector types have been tested to fit in the tight
space for option slot 1.
• Phoenix Contact SUBCON-PLUS-PROFIB/PG/SC2, part number 2708245. Lead
the cable through the control cable hole on the right in the lead-through plate (1).
• Siemens, part number 6GK1 500 0EA02. Lead the cable through the middle
control cable hole in the lead-through plate (2).
1
2
Planning the electrical installation 63