Control Panel Leds - ABB ACS580-01 Hardware Manual



Control panel LEDs

The assistant control panel has one LED. The table below describes the control panel
LED indications. For more information see ACS-AP-x assistant control panels user's
manual (3AUA0000085685 [English]).
Control panel LED, at the left edge of the control panel
LED off LED lit and steady
Panel has Green
no power.
Red
Maintenance and hardware diagnostics 131
Drive functioning normally.
Connection between the
drive and control panel may
be faulty or lost, or the
panel and drive may be
incompatible. Check the
control panel display.
Check the display to see
where the fault is.
• Active fault in the drive.
Reset the fault.
• Active fault in another
drive in the panel bus.
Switch to the drive in
question and check and
reset the fault.
LED blinking/flickering
Green Blinking:
Active warning in the drive
Flickering:
Data transferred between
the PC tool and drive
through the USB
connection of the control
panel
Red Active fault in the drive.
To reset the fault, cycle the
drive power.