Installing The Drive Vertically, Frames R6 - ABB ACS580-01 Hardware Manual


Installing the drive vertically, frames
1. Mark the hole locations for the six mounting holes using the mounting template
included in the package. Do not leave the mounting template under the drive.
The drive dimensions and hole locations are also shown in the drawings in
chapter Dimension drawings
Note: You can use only two bolts instead of four to attach the lower part of the drive.
1
c
2. Drill the mounting holes.
3. Insert fixing anchors or plugs into the holes and start the bolts into the anchors or
plugs.
Use a sufficient number of bolts and drive them long enough into the wall to make
them carry the weight of the drive.
4. Position the drive onto the bolts on the wall. Lift the drive with another person as it
is heavy.
5. Tighten the bolts in the wall securely.
2
on page 167.
R6
mm
a 571
b 531
c 213
d 300
e 200
× 4
IP21 kg
45
IP55 kg
46 101.4
M8
3
× 2
Mechanical installation 55
R6...R9
R7
in mm in mm
22.5 623 24.5 701
20.9 583 22.9 658
8.4 245 9.7 263
11.8 300 11.8 300
7.9 200 7.9 200
lb kg lb kg
99 55 121 70
lb kg lb kg
56 123.5 74
4
× 2
R8 R9
in mm in
27.6 718 28.3
25.9 658 25.9
10.4 345 13.6
11.8 300 11.8
7.9 200 7.9
lb kg lb
154 98 216
lb kg lb
163.2 102 224.9
5