Connecting A Pc - ABB ACS580-01 Hardware Manual
Hide thumbs
Also See for ACS580-01:
- Quick installation and setup manual (434 pages) ,
- Hardware manual (278 pages) ,
- Quick installation (276 pages)
Table of Contents
Advertisement
116 Electrical installation
Connecting a PC
To be able to connect a PC to the drive, you need an assistant control panel.
Connect a PC to the drive with a USB data cable (USB Type A <-> USB Type Mini-B)
as follows:
1. Lift the USB connector cover from bottom upwards.
2. Put the USB cable Mini-B plug in the control panel USB connector.
3. Put the USB cable A-plug in the USB connector of the PC (3a). The panel
displays text "USB connected" (3b).
Note: Panel keys cannot be used when a USB data cable is connected to the panel.
3a
3b
1
2
For information on using the Drive composer PC tool, see Drive composer PC tool
user's manual (3AUA0000094606 [English]).
Advertisement
Table of Contents
