ABB ACS580-01 Hardware Manual page 191

The table shows reference resistor types for the maximum braking power.
Type R
min
ACS580-01
ohm
3-phase U = 400 or 480 V (380...415 V, 440...480 V)
N
0246-4 52
03A3-4 52
04A0-4 52
05A6-4 52
07A2-4 52
09A4-4 52
12A6-4 52
017A-4 31
025A-4 22
032A-4 16
038A-4 10
045A-4 10
Symbols
R = minimum allowed brake resistor that can be connected to the brake chopper
min
R = maximum allowed brake resistor that allows P
max
P = maximum braking capacity of the drive, must exceed the desired braking power.
BRmax
WARNING! Do not use a brake resistor with a resistance below the minimum
value specified for the particular drive. The drive and the internal chopper are
not able to handle the overcurrent caused by the low resistance.
R P
max BRmax
ohm kW hp
864 0.6 0.8
582 0.9 1.2
392 1.4 1.9
279 2.0 2.7
191 2.9 3.9
140 3.9 5.2
104 5.3 7.1
75 7.3 9.8
52 10 13.6 CBR-V 560 D HT 406 39R UL
37 15 20.1 CBT-H 560 D HT 406 19R
27 20 26.8 CBT-H 760 D HT 406 16R
22 25 33.5 CBT-H 760 D HT 406 16R
Reference resistor types
Danotherm
CBH 360 C T 406 210R
CBH 360 C T 406 210R
CBH 360 C T 406 210R
CBH 360 C T 406 210R
CBR-V 330 D T 406 78R UL
CBR-V 330 D T 406 78R UL
CBR-V 330 D T 406 78R UL
CBR-V 560 D HT 406 39R UL
3AXD00000586715.xls G
BRmax
Resistor braking 191