Installing The Drive Vertically, Frame R5 - ABB ACS580-01 Hardware Manual

52 Mechanical installation

Installing the drive vertically, frame
1. Mark the hole locations using the mounting template included in the package. Do
not leave the mounting template under the drive. The drive dimensions and hole
locations are also shown in the drawings in chapter
167.
2. Drill the mounting holes.
3. Insert fixing anchors or plugs into the holes and start the bolts into the anchors or
plugs.
Use a sufficient number of bolts and drive them long enough into the wall to make
them carry the weight of the drive.
b
1
R5
200 mm (7.9 in)
M6
2 3
300 mm (11.8 in)
Dimension drawings
R5
mm
581/
a
611.5
b 160
IP21 kg
23.0
on page
in
22.87/
24.07
6.30
lb
50.72