Connecting A Pc To The Service Port - ABB IRC5 Product Manual

2 Installation and Commissioning, IRC5

2.5.6. Connecting a PC to the service port

2.5.6. Connecting a PC to the service port
NOTE!
The service port shall only be used for direct connection to a PC as described in this
procedure. It must not be connected to a LAN (local area network), since it has a DHCP server
that automatically distributes IP addresses to all units connected to the LAN.
Contact your network administrator if you need more information.
NOTE!
Maximum number of connected network clients using robapi are:
62
•
LAN: 3
• Service: 1
•
FlexPendant: 1
Continues on next page
3HAC027707-001 Revision: D