Table of Contents
Advertisement
Getting Started
Getting Started
Getting Started
The instructions in this chapter show you how to install your
Agilent 86120C. You should be able to finish these procedures in about
ten to twenty minutes. After you've completed this chapter, continue
with
Refer to
information on operating conditions such as temperature.
If you should ever need to clean the cabinet, use a damp cloth only.
This product has autoranging line voltage input. Be sure the supply voltage is
C A U T I O N
within the specified range.
The front panel LINE switch disconnects the mains circuits from the mains
C A U T I O N
supply after the EMC filters and before other parts of the instrument.
Install the instrument so that the LINE switch is readily identifiable and is easily
C A U T I O N
reached by the operator. The LINE switch or the detachable power cord is the
instrument disconnecting device. It disconnects the mains circuits from the
mains supply before other parts of the instrument. Alternately, an externally
installed switch or circuit breaker (which is really identifiable and is easily
reached by the operator) may be used as a disconnecting device.
Install the instrument according to the enclosure protection provided. This
C A U T I O N
instrument does not protect against the ingress of water. This instrument
protects against finger access to hazardous parts within the enclosure.
1-2
Chapter 2, "Making
Measurements".
Chapter 6, "Specifications and Regulatory Information"
for
Advertisement
Table of Contents
