Table of Contents
Advertisement
MARKer:MAXimum:NEXT
Moves the marker to the laser line with the next lower power level.
Syntax
:DISPlay:MARKer:MAXimum:NEXT
Preset State: marker set to maximum- power laser line
Attribute
Summary
*RST State: marker set to maximum- power laser line
SCPI Compliance: instrument specific
Command Only
If the display is in the List by WL mode, it will be changed to List by
Description
Ampl before the marker is moved.
MARKer:MAXimum:PREVious
Moves the marker to the laser line that has the next higher power
level.
Syntax
:DISPlay:MARKer:MAXimum:PREVious
Attribute
Preset State: marker set to maximum- power laser line
Summary
*RST State: marker set to maximum- power laser line
SCPI Compliance: instrument specific
Command Only
Description
If the display is in the List by WL mode, it will be changed to List by
Ampl before the marker is moved.
Programming Commands
DISPlay Subsystem
4-77
Advertisement
Table of Contents
