Table of Contents
Advertisement
General Safety Considerations
This product complies with Overvoltage Category II and Pollution Degree 2.
C A U T I O N
VENTILATION REQUIREMENTS: When installing the product in a cabinet, the
C A U T I O N
convection into and out of the product must not be restricted. The ambient
temperature (outside the cabinet) must be less than the maximum operating
temperature of the product by 4
If the total power dissipated in the cabinet is greater than 800 watts, then forced
convection must be used.
Always use the three-prong ac power cord supplied with this instrument. Failure
C A U T I O N
to ensure adequate earth grounding by not using this cord may cause
instrument damage.
Do not connect ac power until you have verified the line voltage is correct as
C A U T I O N
described in
could result.
This instrument has autoranging line voltage input. Be sure the supply voltage
C A U T I O N
is within the specified range.
viii
°
C for every 100 watts dissipated in the cabinet.
"Line Power Requirements" on page
1-5. Damage to the equipment
Advertisement
Table of Contents
