Agilent Technologies 86120C User Manual page 204

Programming Commands
DISPlay Subsystem
MARKer:MAXimum
Sets the marker to the laser line that has the maximum power.
Syntax
:DISPlay:MARKer:MAXimum
Preset State: marker set to maximum- power laser line
Attribute
Summary *RST State: marker set to maximum- power laser line
SCPI Compliance: instrument specific
Command Only
MARKer:MAXimum:LEFT
Moves the marker left to the next laser line.
Syntax
:DISPlay:MARKer:MAXimum:LEFT
Attribute Preset State: marker set to maximum- power laser line
Summary *RST State: marker set to maximum- power laser line
SCPI Compliance: instrument specific
Command Only
Description Moves the marker from the current marker position to the next laser
line having the following characteristic:
• shorter wavelength
• lower frequency
• lower wave number
If the display is in the List by Ampl mode, it will be changed to List by
WL before the marker is moved.
4-76