Table of Contents
Advertisement
Notices
This document contains propri-
etary information that is pro-
tected by copyright. All rights are
reserved.
No part of this document may
reproduced in (including elec-
tronic storage and retrieval or
translation into a foreign lan-
guage) without prior agreement
and written consent from Agilent
Technologies Deutschland GmbH
as governed by United States and
international copywright laws.
Copyright 2001 - 2004 by:
Agilent Technologies
Deutschland GmbH
Herrenberger Str. 130
71034 Böblingen
Germany
Subject Matter
The material in this document is
subject to change without notice.
Agilent Technologies makes no
warranty of any kind with regard
to this printed material, includ-
ing, but not limited to, the implied
warranties of merchantability and
fitness for a particular purpose.
Agilent Technologies shall not be
liable for errors contained herein
or for incidental or consequential
damages in connection with the
furnishing, performance, or use of
this material.
Warranty
This Agilent Technologies instru-
ment product is warranted
against defects in material and
workmanship for a period of one
year from date of shipment. Dur-
ing the warranty period, Agilent
will, at its option, either repair or
replace products that prove to be
defective.
For warranty service or repair,
this product must be returned to a
service facility designated by Agi-
lent. Buyer shall prepay shipping
charges to Agilent and Agilent
shall pay shipping charges to
return the product to Buyer. How-
ever, Buyer shall pay all shipping
charges, duties, and taxes for
ii
products returned to Agilent from
another country. Agilent warrants
that its software and firmware
designated by Agilent for use
with an instrument will execute
its programming instructions
when properly installed on that
instrument. Agilent does not war-
rant that the operation of the
instrument, software, or firm-
ware will be uninterrupted or
error free.
Limitation of Warranty
The foregoing warranty shall not
apply to defects resulting from
improper or inadequate mainte-
nance by Buyer, Buyer-supplied
software or interfacing, unautho-
rized modification or misuse,
operation outside of the environ-
mental specifications for the
product, or improper site prepara-
tion or maintenance.
No other warranty is expressed or
implied. Agilent Technologies
specifically disclaims the implied
warranties of Merchantability and
Fitness for a Particular Purpose.
Exclusive Remedies
The remedies provided herein are
Buyer's sole and exclusive reme-
dies. Agilent Technologies shall
not be liable for any direct, indi-
rect, special, incidental, or conse-
quential damages whether based
on contract, tort, or any other
legal theory.
Assistance
Product maintenance agreements
and other customer assistance
agreements are available for Agi-
lent Technologies products. For
any assistance contact your near-
est Agilent Technologies Sales
and Service Office.
Certification
Agilent Technologies Inc. certi-
fies that this product met its pub-
lished specifications at the time
of shipment from the factory. Agi-
lent Technologies further certifies
that its calibration measurements
are traceable to the United States
National Institute of Standards
and Technology, NIST (formerly
the United States National
Bureau of Standards, NBS) to the
extent allowed by the Institutes's
calibration facility, and to the cali-
bration facilities of other Interna-
tional Standards Organization
members.
ISO 9001 Certification
Produced to ISO 9001 interna-
tional quality system standard as
part of our objective of continu-
ally increasing customer satisfac-
tion through improved process
control.
Safety Notices
CAUTION
Caution denotes a hazard. It calls
attention to a procedure which, if
not correctly performed or
adhered to, could result in dam-
age to or destruction of the prod-
uct. Do not proceed beyond a
caution sign until the indicated
conditions are fully understood
and met.
WARNING
Warning denotes a hazard. It calls
attention to a procedure which, if
not correctly performed or
adhered to, could result in injury
or loss of life. Do not proceed
beyond a warning sign until the
indicated conditions are fully
understood and met.
The instruction manual
symbol. The product is
marked with this warning
symbol when it is neces-
sary for the user to refer
to the instructions in the
manual.
The laser radiation sym-
bol. This warning symbol
is marked on products
which have a laser out-
put.
The AC symbol is used to
indicate the required
nature of the line module
input power.
The ON symbols are
used to mark the posi-
tions of the instrument
power line switch.
The OFF symbols are
used to mark the posi-
tions of the instrument
power line switch.
The CE mark is a regis-
tered trademark of the
European Community.
The CSA mark is a regis-
tered trademark of the
Canadian Standards
Association.
The C-Tick mark is a reg-
istered trademark of the
Australian Spectrum
Management Agency.
This text denotes the
ISM1-A
instrument is an Indus-
trial Scientific and Medi-
cal Group 1 Class A
product.
Typographical Conventions.
The following conventions are
used in this book:
Key type for keys or text located
on the keyboard or instrument.
Softkey type for key names that
are displayed on the instrument's
screen.
Display type for words or charac-
ters displayed on the computer's
screen or instrument's display.
for words or characters
User type
that you type or enter.
Emphasis type for words or char-
acters that emphasize some point
or that are used as place holders
for text that you type.
Second Edition
86120-90C03 August 2004
First Edition:
86120-90035: February 2000
Advertisement
Table of Contents
