Table of Contents
Advertisement
INITiate:CONTinuous
Selects single or continuous measurement acquisition.
Syntax
:INITiate:CONTinuous{?| {ON | OFF | 1 | 0}}
Attribute
Non- sequential command
Summary
Preset State: on
*RST State: off
SCPI Compliance: standard
Description
When on is specified, the instrument continuously measures the input
spectrum.
Non-sequential command
Always use an *OPC? query or a *WAI command to ensure that this command has
the time to complete before sending any more commands to the instrument.
to "Always force the Agilent 86120C to wait for non-sequential commands" on
page 3-12
for more information.
Programming Commands
TRIGger Subsystem
Refer
4-105
Advertisement
Table of Contents
