Agilent Technologies 86120C User Manual page 7

If this instrument is not used as specified, the protection provided by
WA R N I N G
the equipment could be impaired. This instrument must be used in a
normal condition (in which all means for protection are intact) only.
No operator serviceable parts inside. Refer servicing to qualified
WA R N I N G
personnel. To prevent electrical shock, do not remove covers.
To prevent electrical shock, disconnect the Agilent 86120C from mains
WA R N I N G
before cleaning. Use a dry cloth or one slightly dampened with water
to clean the external case parts. Do not attempt to clean internally.
This is a Safety Class 1 product (provided with protective earth). The
WA R N I N G
mains plug shall only be inserted in a socket outlet provided with a
protective earth contact. Any interruption of the protective conductor
inside or outside of the product is likely to make the product dangerous.
Intentional interruption is prohibited.
For continued protection against fire hazard, replace line fuse only with
WA R N I N G
same type and ratings, (type F 6.3A/250V IEC 60127 type 5x20mm). The
use of other fuses or materials is prohibited. Verify that the value of the
line-voltage fuse is correct.
General Safety Considerations
vii