Table of Contents
Advertisement
Programming Commands
DISPlay Subsystem
MARKer:MAXimum:RIGHt
Moves the marker right to the next laser line.
Syntax
:DISPlay:MARKer:MAXimum:RIGHt
Preset State: marker set to maximum- power laser line
Attribute
Summary
*RST State: marker set to maximum- power laser line
SCPI Compliance: instrument specific
Command Only
Description
Moves the marker from the current marker position to the next laser
line having the following characteristic:
• longer wavelength
• higher frequency
• higher wave number
If the display is in the List by Ampl mode, it will be changed to List by
WL before the marker is moved.
[WINDow]:GRAPhics:STATe
Turns on and off the display of the power bars.
Syntax
:DISPlay[:WINDow]:GRAPhics:STATe{?| {ON | OFF | 1 | 0}}
Attribute
Preset State: on
Summary
*RST State: on
SCPI Compliance: standard
Description
Specifying on displays the power bars in all modes except the drift
and signal- to- noise modes. Specifying off prevents the display of
power bars for all instrument modes.
4-78
Advertisement
Table of Contents
