Table of Contents
Advertisement
Measuring Wavelength and Power
This section gives you step- by- step instructions for measuring peak
wavelength, average wavelength, peak power, and total input power.
There are three display modes:
• Peak wavelength
• List- by- wavelength or power
• Average wavelength and total power
If the measured amplitudes are low, clean the front- panel OPTICAL
INPUT connector.
This section includes:
Peak WL mode 2- 4
List by WL or Power modes 2- 6
Total power and average wavelength
Limiting the wavelength measurement range 2- 8
Measuring broadband devices and chirped lasers 2- 9
Graphical display of optical power spectrum
Instrument states 2- 11
Power bar 2- 11
Making Measurements
Measuring Wavelength and Power
2- 7
2- 10
2-3
Advertisement
Table of Contents
