Table of Contents
Advertisement
Getting Started
Step 3. Connect a Printer
3 Connect the other end of the line- power cord to the power receptacle.
Various power cables are available to connect the Agilent 86120C to ac
power outlets unique to specific geographic areas. The cable appropri-
ate for the area to which the Agilent 86120C is originally shipped is
included with the unit. The cable shipped with the instrument also has
a right- angle connector so that the Agilent 86120C can be used while
sitting on its rear feet. You can order additional ac power cables for
use in different geographic areas.
page 7-
18.
Step 3. Connect a Printer
The Agilent 86120C can print hardcopies of measurement results on a
printer. The output is ASCII text. If you don't have a printer, continue
with
"Step 4. Turn on the Agilent 86120C" on page 1-
1 Using a standard parallel printer cable, connect the printer to the
Agilent 86120C's rear- panel PARALLEL PRINTER PORT connector.
1-6
Refer to "Power Cords" on
7.
Advertisement
Table of Contents
