ASNR:COUNt
Sets the number of measurements to be used for the average signal- to-
noise calculation.
Syntax
:CALCulate3:ASNR:COUNt {?|{<integer> | MINimum | MAXimum }}
<integer> is a value that is within the following limits:
Constant
MINimum
MAXimum
Attribute
Preset State: 100
Summary
*RST State: 100
SCPI Compliance: instrument specific
Description
This command sets the number of measurements to be used for the
average signal- to- noise calculation. If this count is changed while the
average signal calculation is on, and the new count is less than the
number of measurements already taken, the instrument will go into
single measurement mode.
Description
10
900
Programming Commands
CALCulate3 Subsystem
4-47