First Power-On; Check The Correct Operation Of The Machine - Technogym RUN PERSONAL Service Maintenance Manual

RUN PERSONAL: Service & maintenance manual - rev. 3.1

5.4. FIRST POWER-ON

1. After completing the installation procedure, the machine is ready for use.
2. To turn on the machine, simply toggle the on/off switch from the "0" position to the "1" position
and press the secondary switch on button on the front guard.
3. During the power-up the machine performs a communication test between upper and lower
electronics.
4. After the test, the machine enters the stand by mode, awaiting for a command.

5.5. CHECK THE CORRECT OPERATION OF THE MACHINE

1. Get on the machine;
2. Start exercising;
3. Press on the right joystick and check that the speed change;
4. Press on the left joystick and check that the incline change;
5. Put on the heart rate meter and check that the machine correctly reads the heart rate value;
6. Grasp the sensors and check that the machine correctly reads the heart rate value;
7. Carry out the "Touch Screen calibration" procedure described at the relevant paragraph of the
Service menu.
Page 5.3