RUN PERSONAL: Service & maintenance manual - rev. 3.1
8.5. TRAVEL LIMIT MICROSWITCH POSITION
Figure 8.5-1
Figure 8.5-2
Adjust the position of the microswitch
support as indicated by the arrows, in
such a way that it intercepts the
carriage frame at the 0% incline
position.
1. Unloosen the 2 screws (a) securing the travel
limit microswitch support.
The
correct
approximately 130mm.
1. After making the adjustment, lock down the
screws (a) backed off previously.
distance
"X"
is
Page 8.5