Ale Power Supply Box; Supplementary Power Supply; Autotransformer - Technogym RUN PERSONAL Service Maintenance Manual

3.12.2. ALE
POWER SUPPLY BOX
This is a box which contains:
The machine's power inlet socket.
The on-off switch.
2 resettable THERMAL CUTOUTS which monitor overloads on the phase and neutral.
An inductor
Filter Board
This power supply box manages the power circuits of the machine: in particular, the input high
voltage, which is then sent to the Drive, controlled through a second on-off switch.
3.12.3. S
UPPLEMENTARY POWER SUPPLY
This provides a supplementary +12V line required for operation of the VISIO, which in particular
uses it for powering the lights of the LCD.
ATTENTION If the LCD lights fail to illuminate, one reason could be that this
supplementary power supply is not supplied or is not working, and thus in its turn fails
to supply the LCD.

3.13. AUTOTRANSFORMER

Only for 110Vac version.
It is a toroidal Autotransformer, placed on a plate fixed to the frame in the bottom of the machine
under the running deck. The Autotransformer is connected in series to the power supply of the
equipment and allows to use the 110Vac power supply. It receives the 110Vac power supply and
provide an output voltage of 220Vac for the Driver.
Page 3.10
RUN PERSONAL: Service & maintenance manual - rev. 3.1