Disassembling The Closing Lower Guards - Technogym RUN PERSONAL Service Maintenance Manual

RUN PERSONAL: Service & maintenance manual - rev. 3.1
7.10.3. D
ISASSEMBLING THE CLOSING LOWER GUARDS
Before to proceed, place some cartoons or protective stuff to avoid damage the lateral
casings and upright of the machine.
Carefully turn the machine over on one side, to have a better access to the lower zone.
For each guard:
1. Back off the 2 screws (a) using a 4mm hexagonal wrench.
2. Remove the 4 guards (b).
Figure 7.10-14
Page 7.25