Technogym RUN PERSONAL Service Maintenance Manual page 90

Figure 7.3-4
Figure 7.3-5
Figure 7.3-6
Page 7.6
RUN PERSONAL: Service & maintenance manual - rev. 3.1
During reassembly,
sequence indicated in the figure at left.
Removing the USB port (Y):
1. Back off the 2 screws (a) using a flat blade
screwdriver.
2. Remove the USB port (b).
Removing the iPod docking station (Z):
1. Back off the 3 screws (a) using a medium
Phillips screwdriver.
2. Remove the fixing plate (b).
3. Remove the iPod assembly (c).
To reassemble the TGS reader, USB port and
iPod docking station, carry out the above steps
in reverse order.
Continued on following page...
follow the