12.2. REQUIRED TOOLS
The following tools are required for carrying out the various disassembly, adjustment and
maintenance action on the machine:
• Small Phillips screwdriver;
• Medium Phillips screwdriver;
• Big Phillips screwdriver;
• Small flat Phillips screwdriver;
• Medium flat Phillips screwdriver;
•
8mm wrench;
• 10mm wrench;
• 13mm wrench;
• 17mm wrench;
• 3mm Allen-T wrench;
• 4mm Allen -T wrench;
• 5mm Allen -T wrench;
• 6mm Allen -T wrench;
• 8mm Allen -T wrench;
• Torque wrench,
• Scissors.
You can order a complete set of hexagonal wrenches consisting of 7 pieces: 2, 2.5, 3, 4,
5, 6 and 8 mm. The code to be used is R0003677AA.
• Excite Test box (cod.H0003180AA-UK).
Page 12.2
RUN PERSONAL: Service & maintenance manual - rev. 3.1