Moving; Installation - Technogym RUN PERSONAL Service Maintenance Manual

5.2. MOVING

The equipment has two fixed front wheels.
To move the equipment, lift it up slightly, as shown in the illustration, and push it forwards and
backwards. Given the weight of the equipment, we recommend 2 person be involved in lifting it.
After every moving, check if the equipment is on flat, adjust the left foot, as indicated at the
paragraph: 8.6. "The machine is not flat".

5.3. INSTALLATION

1. Ensure that the specifications and requirements for installation have been met (see paragraph
5.1. "Specifications and requirements").
2. Depending on the destination country, the machine may be shipped partially disassembled,
packed inside a special carton and fixed to a pallet, or fully assembled, wrapped in clear plastic
and fixed to a wooden pallet. Follow the assembly operations described in the instruction sheets
supplied with the machines
3. Connect the mains lead to the power inlet socket on the machine.
4. Place the on/off switch in the "0" position.
5. Plug the mains lead into the wall outlet.
6. Connect the antenna cable to the socket and respect the requirements by reference to the relevant
chapter of the manual specific.
Page 5.2
RUN PERSONAL: Service & maintenance manual - rev. 3.1