Centering And Adjusting The Belt - Technogym RUN PERSONAL Service Maintenance Manual

RUN PERSONAL: Service & maintenance manual - rev. 3.1

8.3. CENTERING AND ADJUSTING THE BELT

1. Start the machine at a speed of 10 km/h.
2. Check that the graphics on the tread belt remain equidistant from the edges, correcting any
tendency to shift to the right or left exclusively by adjusting the left tension screw (a). Locking
down this screw the belt shift to the right and vice versa.
3. Gradually increase the speed to 16 km/h, making any small adjustments that are necessary until
the tread belt is perfectly centered.
Figure 8.3-1
Page 8.3