Disassembling The Center Handlebar And Joystick - Technogym RUN PERSONAL Service Maintenance Manual

RUN PERSONAL: Service & maintenance manual - rev. 3.1
7.9. DISASSEMBLING THE CENTER HANDLEBAR AND
JOYSTICK
Figure 7.9-1
Figure 7.9-2
Figure 7.9-3
1. Slightly force the lower joystick cover in the
direction of the arrow on the front, using a
small flat-blade screwdriver.
2. Remove the cover (a) pulling it downward.
3. Back off the 4 screws (b) using a 5mm hex
wrench.
4. Unplug the Joystick connector (c) and the
earthing Faston.
5. Remove the handlebar and the joystick.
To reassemble the joystick and the handlebar,
carry out the above steps in reverse order.
Page 7.19