Figure 7.5-8
CPU Board (F):
1. Unplug all the connectors from the CPU board indicated in the figure.
2. Remove the TUNER board (C) as illustrated in Figure 7.5-5 onward.
3. Remove the Wireless Board (E) as indicated in Figure 7.5-7 onward.
Page 7.14
RUN PERSONAL: Service & maintenance manual - rev. 3.1
2. Push the 2 side tabs simultaneously outward,
in the direction of the arrows.
3. The Wireless Board (E) will automatically
lift up.
4. Remove it from its connector (a), as shown
in the figure.
Figure 7.5-9
Continued on following page...