Disassembling The Hs/Hr Receiver - Technogym RUN PERSONAL Service Maintenance Manual

RUN PERSONAL: Service & maintenance manual - rev. 3.1

7.7. DISASSEMBLING THE HS/HR RECEIVER

Figure 7.7-1
Figure 7.7-2
For the operations that follow: turn off the
machine and unplug the mains lead from the
wall outlet.
1. Back off the 2 screws (a) using a 4mm hex
wrench.
2. Remove the small guard (b).
3. Unplug the 2 connectors (c), (d) and the earth
connection Faston (e) from the receiver.
4. Remove the HS/HR receiver (f).
To reassemble the HS/HR receiver, carry out the
above steps in reverse order.
Page 7.17