Starter Motor Seat Cover Installation (Tc); Cylinder Head Cover, Spark Plug, Oil Feed Hose Installation - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

ENGINE REASSEMBLY

Starter motor seat cover installation (TC)

Refit the cover (1) with its gasket making sure the arrow is pointing "UP".
Tighten the screws (2) with the wire clip (3) placed on the upper screw.

Cylinder head cover, spark plug, oil feed hose installation

Position the central seal (1).
Fit the head cover (3) with its gasket to the head (2).
Tighten the screws (4) and (4a) (8 Nm, 0.8 Kgm, 5.9 ft/lb).
Screw 4 - L=23.4 mm
Screw 4a - L=31.3 mm
Install the spark plug (10-12 Nm, 1-1.23 Kgm, 7.2 -8.9 ft/lb).
H.50 Ed. 07-2010