Reassembly Of Cylinder Head Cover, Spark Plug, Lubrication Hose; Reassembly Of Gear Shift Position Sensor - Husqvarna TC 450 Workshop Manual

Hide thumbs Also See for TC 450:

Table of Contents

ENGINE REASSEMBLY

Reassembly of cylinder head cover, spark plug, lubrication hose

Mount the cylinder head cover and its gasket on the cylinder head. Tight the

screws whilst following a cross-over pattern and in steps (8 Nm-0,8 Kgm-5.8

ft/lb). Assemble the spark plug (10÷12 Nm-1÷1,23 Kgm-7.2÷8.9 ft/lb) and the

lubrication hose (15 Nm-1,5 Kgm-10.8 ft/lb).

Reassembly of the gear shift position sensor

Remount the spring and the neutral cap in their seat on the positive shaft.

Part. N. 8000 H1344 (10-2009)

Show Quick Links

Table of Contents