Transmission Cover Disassembly; Clutch Disassembly (Tc, Te, Txc; Smr 450-510) - Husqvarna TC 450 Workshop Manual

Hide thumbs Also See for TC 450:

Table of Contents

ENGINE DISASSEMBLY

Transmission cover disassembly

Remove the twelve cover fastening screws (8 mm wrench) then the transmission

cover. Remove gasket, dowel bushings and O-Rings.

Clutch disassembly (TE-TXC-TC; SMR 450-510)

Remove the six screws (12) that fasten the springs (11) (5 mm wrench, whilst

following a cross-over pattern and in steps). Remove the pressure plate (10) with

the bearing and the clutch control cap (9). Remove clutch discs (8).

Part. N. 8000 H1344 (10-2009)

Show Quick Links

Table of Contents